Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Folsom?
A chimney liner replacement in Folsom typically runs $2,400 to $5,800, while a partial chimney rebuild (the section above the roofline) generally lands between $3,200 and $9,500. A full tear-down-to-grade rebuild can push past $12,000 when the foundation and smoke chamber are both compromised. Most Folsom homeowners we visit for a reline end up in the $3,000 to $4,200 range once a stainless DuraFlex liner, insulation, and a new top plate are factored in.
Those numbers are for 2026 and reflect what we actually quote in Folsom, not national averages pulled from a cost database. The gap between the bottom and top of each range comes down to flue size, liner material, roofline height, and how much of the existing masonry can be saved. We sweep, repair, and reline under one roof, so when we give you a number it covers the whole job, not just the part we feel like doing.
Key Takeaways
- Standard stainless liner install in Folsom: $2,400 – $4,200
- Above-roof chimney rebuild: $3,200 – $9,500
- Full rebuild to grade: $9,000 – $12,000+ when a new foundation is needed
- HeatShield flue resurfacing (when the liner is still structurally sound): $1,400 – $2,600
- Roofline height and pitch are the two biggest cost drivers on Folsom’s steeper canyon properties
If you want the full picture of what a rebuild entails, our Chimney Liner & Rebuild in Folsom service covers the process step by step. For this page, though, the question is dollars.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items break out for a typical Folsom job. Prices are installed, materials and labor included.
| Line item | Typical range (Folsom, 2026) | Notes |
|---|---|---|
| Stainless steel liner (6″ oval, single-story) | $2,400 – $3,400 | DuraFlex or Olympia Chimney, insulated |
| Stainless liner, two-story or steep pitch | $3,400 – $4,800 | Added height and staging |
| HeatShield flue resurfacing | $1,400 – $2,600 | Restores a sound liner without tear-out |
| Top plate, cap, and crown repair | $350 – $900 | Gelco and Famco caps and hardware |
| Above-roof rebuild (crown, top courses) | $3,200 – $6,500 | Most common rebuild scope |
| Rebuild with smoke chamber parging | $4,500 – $9,500 | Seals leaks and corrects drafting |
| Full rebuild to grade with foundation | $9,000 – $12,000+ | Reserved for structurally failed chimneys |
| Flue tile replacement (per section) | $450 – $1,200 | Often paired with a reline |
What drives you toward the top of a range? A steep roofline means staging and safety rigging, which adds labor hours. A flue that’s been misaligned since the house was built (we see this in some of the older Folsom Ranch and Briggs Ranch homes) means the liner has to be sized and guided carefully rather than dropped straight down. And any rotted framing behind the brick has to be repaired before a new liner goes in, or you’re just hiding the problem.
What drives you toward the bottom? A straight vertical flue, easy roof access, and a liner that’s still structurally sound enough for HeatShield resurfacing instead of a full reline. That last one is worth asking about specifically, because resurfacing costs roughly half of a full liner job and not every chimney company offers it.
What Affects Chimney Liner & Rebuild Pricing in Folsom
Six things move the number more than anything else on a Folsom job:
- Roofline height and pitch. Folsom has a lot of two-story homes and homes built into the rolling terrain near the American River. A tall, steep chimney needs proper staging and fall protection, and that shows up in the labor line.
- Liner material and brand. We install DuraFlex and Olympia Chimney liners because they hold up to the temperature cycling a wood-burning fireplace puts them through. A cheaper liner saves you a few hundred dollars today and comes back as a failure in a handful of years. Professional-grade materials, not hardware-store substitutes.
- Insulation. An insulated liner wrap protects against creosote buildup and improves draft, and it’s standard on a proper job. Skipping it to save $200 is a bad trade.
- Masonry condition. Cracked crowns, spalling brick, and deteriorated mortar joints all have to be addressed before the liner work. If the crown is failing, water gets in and rots the whole assembly from the inside out.
- Smoke chamber condition. The smoke chamber above the damper is often the worst-preserved part of an older chimney. Parging it corrects drafting and closes gaps a liner alone can’t reach.
- Permits and inspection. Folsom requires a permit for structural chimney work. We handle the inspection and paperwork as part of the quote, so the number you see includes it.
One more local factor: our dry summers and wet winters are hard on masonry. Brick expands and contracts through those swings, and a crown that’s already cracked will let water in during the first storm. That’s why we treat crown and cap repair as part of the liner conversation, not a separate upcharge you get surprised by later.
How to Save on Chimney Liner & Rebuild
Relining and rebuilding aren’t the kind of thing you should price-shop into a mistake. But there are real ways to keep the number down without cutting corners:
- Ask about HeatShield resurfacing before assuming you need a full reline. If the existing liner is still structurally sound but rough, resurfacing restores it for roughly half the cost of a tear-out. We’re HeatShield-certified and will tell you honestly whether your flue qualifies.
- Fix the crown and cap now, not later. A $600 crown repair today prevents a rebuild that runs four figures. Water intrusion is the single most common cause of the rebuilds we see in Folsom.
- Bundle services. If you’re due for a sweep and a dryer vent cleaning anyway, getting everything done in one visit saves a trip charge and a scheduling headache. We sweep, repair, and reline, so one call covers it all.
- Get the estimate in writing, with the liner spec named. A quote that just says “new liner” tells you nothing. Ours names the brand and the material so you can compare apples to apples.
- Don’t skip the inspection. A proper inspection tells you whether you’re looking at a $1,400 resurface or an $8,000 rebuild. Guessing is how people overpay in both directions.
We offer free estimates, and we’ll tell you plainly if repair is the smarter call than replacement. Call (833) 589-9896 to schedule yours and get a real number for your chimney.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Folsom?
A chimney liner in Folsom typically costs $2,400 to $4,800 installed, depending on flue height, roofline access, and whether you need a two-story run. That includes an insulated DuraFlex or Olympia Chimney liner and a new top plate. Call (833) 589-9896 for an exact quote, estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is almost always cheaper when your liner is still structurally sound. HeatShield resurfacing runs $1,400 to $2,600, while a full reline runs $2,400 to $4,800. We assess which path your flue actually needs, there’s no benefit to us in selling a reline you don’t need. Call (833) 589-9896 to get a straight answer on your chimney.
How much does a chimney rebuild cost in Folsom?
An above-roof rebuild in Folsom typically runs $3,200 to $9,500, and a full rebuild to grade with foundation work can reach $9,000 to $12,000 or more. The range depends on how far the damage extends and whether the smoke chamber needs work. Call (833) 589-9896 for a free on-site assessment and a written estimate.
Can you fix my chimney the same day?
Simple repairs like crown patching and cap replacement can often be done same day if parts are on hand. A full reline or rebuild is scheduled work, usually booked a few days out. We stock Gelco and Famco caps and hardware, which shortens the wait. Call (833) 589-9896 to check availability for your Folsom address.
Do I need a permit for chimney liner or rebuild work in Folsom?
Structural chimney work and full rebuilds require a permit in Folsom. Routine relining is often handled as part of the inspection scope. We pull the permits and coordinate inspection as part of the job, so it’s covered in the estimate. Call (833) 589-9896 and we’ll walk you through what your project requires.
Why Folsom Homeowners Call Us
Chimney Sweep Folsom handles sweeping, dryer vent cleaning, and chimney repair, including full liner and rebuild work. That means when we inspect your chimney, we can fix what we find instead of handing you a report and leaving. We diagnose. We fix. We don’t just report and leave.
We install liners and caps from a curated roster of trade brands, DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, because those are the names chimney professionals trust, not the cheapest thing on the shelf. And because dryer vents are one of the leading causes of residential house fires, we clear those too. One call handles your chimney and your dryer vent, no coordinating two contractors.
If you’re not sure whether you’re looking at a repair or a rebuild, start with an inspection from our home team and get a straight answer with a written number.
Contact Us for a Free Estimate
Whether you’re dealing with a drafty fireplace, a cracked crown, or a flue that’s long past its service life, the first step is a real number for your actual chimney. Call Chimney Sweep Folsom at (833) 589-9896 to schedule a free estimate. We’ll inspect, explain what we find in plain terms, and give you a written quote that names the materials. No surprises, no upselling a rebuild you don’t need.
Written by the team at Chimney Sweep Folsom, serving Folsom and the surrounding Sacramento area.
Pricing reflects the Folsom market as of 2026. Chimney Sweep Folsom offers free estimates. Call (833) 589-9896.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Daniel Whitaker"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Ernesto Mendoza"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Kelly Quinn