Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Citrus Heights, CA
Chimney repair in Citrus Heights usually starts with a visual inspection, and more often than not the visual inspection starts with a clay-tile flue that has been quietly falling apart since the 1980s. We’re Chimney Sweep Folsom, and we’ve served Citrus Heights since 2011. Most of the chimneys we work on here sit atop single-story ranch homes built between 1955 and 1975, and the original masonry has spent fifty-plus summers baking in Sacramento Valley heat and fifty-plus winters soaking up rain. That combination cracks clay tiles, rusts dampers, and opens the door for water damage that homeowners don’t see until a shower of tile fragments lands in the firebox. If you’re in the 95610, 95611, or 95621 zip codes and you haven’t had your flue looked at in years, call us at (833) 589-9896 and we’ll tell you exactly what’s going on inside.
Why Citrus Heights Homes Are Different
Citrus Heights is a mid-century Sacramento suburb, and that single fact drives most of what we see on repair calls. The housing stock here is dominated by single-story ranch and tract homes from the 1950s through the 1970s, built with original brick fireplaces, clay-tile liners, and shallow hearths. Those materials were fine when they were installed. They are not fine now. Clay tile cracks under decades of thermal cycling, and a cracked tile is a direct path for heat and gas to reach the wood framing around the chimney chase. In the older neighborhoods near Sunrise Boulevard and Greenback Lane, we regularly find chimney swifts or roof rats nesting in uncapped flues during the dry months. A late-summer inspection and cap install is one of the most common calls we get before the first burn-ban-free evening of fall.
The climate here makes it worse. Citrus Heights has hot, dry summers and mild, wet winters. Masonry expands in the heat and contracts when the rain comes. Crowns spall, mortar joints loosen, and water works its way into the chimney structure. Then there’s the air district’s burn restrictions. Spare the Air days keep flues idle for long stretches, and an idle flue is where animals move in, debris accumulates, and moisture sits against damaged tile for months without anyone noticing. When a homeowner finally lights a fire, that flue is not the same flue they used last season. We approach every Citrus Heights chimney with that assumption.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Citrus Heights Services
The two calls Citrus Heights homeowners make most often are chimney sweeping and dryer vent cleaning, and each has its own dedicated page on this site. Both services address hazards that build up quietly over time, and both are jobs where a homeowner should know exactly what was found and what was done.
Chimney Sweep in Citrus Heights
A chimney sweep in Citrus Heights is rarely a simple brushing. Because so many local flues sit unused through burn-ban stretches, our sweeps routinely turn up animal nests, leaf debris, and flaking clay tile that a standard brush pass alone won’t resolve. We remove the creosote and debris mechanically, then inspect the flue with a camera so you can see the actual condition of the liner. The full picture of what a sweep involves in this area, including pricing and what we look for, is on our Chimney Sweep in Citrus Heights page.
Dryer Vent Cleaning in Citrus Heights
Dryer vent cleaning matters in Citrus Heights for the same reason it matters everywhere: lint is combustible, and a clogged vent is one of the leading causes of residential house fires. What we see here specifically is long, sagging foil duct runs in older ranch homes where the laundry room sits against an exterior wall but the vent still travels fifteen feet through the attic. We clean the full run, check the termination flap outdoors, and tell you honestly whether the venting itself should be replaced. Read the detail on our Dryer Vent Cleaning in Citrus Heights page.
Chimney Repair in Citrus Heights
Chimney repair in Citrus Heights is fundamentally a water-management job. The original clay-tile flues in this city’s 1950s and 1960s ranch homes have reached end-of-life, and the hot, dry summers followed by wet winters have done them no favors. Cracks let moisture into the chimney structure, and moisture turns minor masonry issues into major structural repairs. When we assess a chimney here, we look first at how water enters the system: the cap, the crown, the flashing, and the flue liner itself. We diagnose the actual problem, show you the evidence on camera, and fix what needs fixing. Nothing gets recommended without a photo you can look at yourself. That’s the core of our Chimney Repair work.
Chimney Cap Installation
Signs you need it
You can see daylight from inside the flue where there should be a cap, or you’ve found nesting material, bird droppings, or debris in the firebox.
What it costs in Citrus Heights
A new cap installed in Citrus Heights typically runs $125 to $400 including the part and labor, depending on flue size and whether we’re dealing with a single-flue or multi-flue configuration.
How we do it
We measure the flue opening, select the right cap from our stocked Gelco or Olympia Chimney inventory, and secure it with a mechanical fastener, not adhesive.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, has shifted off the flue, or has a wildlife-damaged screen that no longer keeps animals out.
What it costs in Citrus Heights
Chimney cap replacement in Citrus Heights runs $125 to $400, same as new installation, since the old cap is removed and discarded as part of the job.
How we do it
We remove the old cap, inspect the flue tile for damage beneath it, and install the replacement so it covers the entire flue opening and sheds water away from the masonry.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the fireplace, or water beads on the outside brick after rain, or the existing flashing is visibly pulling away from the roof line.
What it costs in Citrus Heights
Flashing repair in Citrus Heights usually lands between $450 and $1,500 depending on how much of the roof-to-chimney junction needs to be reworked and how much shingle removal is involved.
How we do it
We cut back the old flashing, re-lay step flashing along the chimney’s roof intersection, and seal the junction with a watertight system that moves water off the masonry rather than against it.
Chimney Liner Installation
Signs you need it
The existing clay tile liner has visible cracks, gaps between flue sections, or has collapsed enough that the chimney is no longer safe to vent appliance exhaust.
What it costs in Citrus Heights
A DuraFlex stainless steel liner installed in Citrus Heights typically runs $1,200 to $3,500, with the final number set by flue length, diameter, and how much appliance exhaust the liner must carry.
How we do it
We size the liner to the appliance load, feed it down the existing flue, and insulate it where code requires so the system drafts properly and meets clearance rules.
What Chimney Repair Costs in Citrus Heights
| Item | Typical range in Citrus Heights |
|---|---|
| Chimney cap installation | $125 – $400 |
| Chimney flashing repair | $450 – $1,500 |
| Chimney liner installation | $1,200 – $3,500 |
How long does chimney repair take in Citrus Heights?
Most cap installations and flashing repairs are completed in one visit. A full liner installation usually takes one business day, and we book it around your availability, not the other way around.
Can you repair a chimney in Citrus Heights without replacing the whole thing?
Yes, often. A cracked clay liner can sometimes be addressed with a HeatShield resurfacing application rather than full tear-out. We’ll show you the camera footage and tell you plainly which path makes sense for your chimney.
Brands We Service in Citrus Heights
We stock parts from trade brands, not hardware-store substitutes. On Citrus Heights jobs we regularly install Gelco and Olympia Chimney caps, Famco ventilation hardware, and Copperfield components, and we carry common sizes on the truck so most repairs don’t wait on a parts order. More detail is on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Citrus Heights, CA
| Service | Typical range in Citrus Heights |
|---|---|
| Chimney sweep (inspection included) | $100 – $200 |
| Chimney cap installation | $125 – $400 |
| Chimney cap replacement | $125 – $400 |
| Chimney flashing repair | $450 – $1,500 |
| Chimney crown repair | $250 – $900 |
| Chimney liner installation | $1,200 – $3,500 |
| HeatShield flue resurfacing | Quoted per linear foot after inspection |
| Dryer vent cleaning | $85 – $150 |
What pushes price up in Citrus Heights is almost always access and existing damage. A steep roof pitch near the older tract homes off Sunrise Boulevard or a flue with collapsed clay sections that must be broken out before a liner goes in will move a job toward the upper end of its range. We give you a flat price before any work starts, so the number we quote is the number you pay.
Neighborhoods We Serve in Citrus Heights
We cover the full Citrus Heights area, and we schedule based on your block, not a wide service window. Calls placed early in the week for homes in the following neighborhoods are typically scheduled within a few days.
- Sunrise Ranch
- Arcade Creek
- Cripple Creek
- Sylvan Corners
- Twin Oaks
Service Area – Cities Near Citrus Heights
We work throughout the Sacramento Valley and the surrounding foothill communities. In addition to Citrus Heights, we regularly serve Antelope, CA, Fair Oaks, CA, Gold River, CA, and Orangevale, CA. If you’re in one of those cities and your chimney predates the 1980s, the odds are good you have the same clay-tile issues we see across Citrus Heights.
Serving Citrus Heights, CA – Our Local Coverage Area
We’re based in the Citrus Heights area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Citrus Heights
Most cap replacements, crown repairs, and liner installations done inside the existing chimney chase don’t require a separate permit, but structural masonry rebuilds can. We’ll tell you at the estimate stage if your job needs city approval and help you understand what that process looks like.
Most homeowners in Citrus Heights get on our schedule within a few days of calling. During late summer and early fall, which is the busiest season for pre-burn inspections, the wait can stretch up to a week. Call (833) 589-9896 and we’ll give you the next open slot.
Yes. We work across all Citrus Heights zip codes, 95610, 95611, and 95621, from the older ranch neighborhoods to the newer subdivisions. The housing age varies block by block, but the fireplace and venting systems all respond to the same valley climate.
If your Citrus Heights chimney has not been inspected in the last two years, or you’ve noticed water stains, animal activity, or smoke backing into the room, call us at (833) 589-9896. We’ll assess what’s going on, show you the evidence, and give you a flat price before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Citrus Heights Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Raj Gupta"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Daniel Whitaker"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Ernesto Mendoza