Chimney Company in Antelope - Flat-Price Sweep, Photo Report Included

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (833) 589-9896

Flat price quoted before we book

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Antelope, CA

Chimney repair in Antelope usually means working on factory-built prefab fireplaces and metal flue systems, not old brick stacks. Most homes here were built between the 1980s and 2000s, and their chimneys are engineered metal assemblies that need a different repair approach than the masonry work common in older Sacramento neighborhoods. Chimney Sweep Folsom has served Antelope since 2011, and we handle everything from flue-cap replacement to full liner retrofits. Call (833) 589-9896 if you suspect a chimney problem before the next burn season.

Call (833) 589-9896

Why Antelope Homes Are Different

Antelope sits in the northern Sacramento Valley, where summers are hot and dry and winters bring cool, damp air that sends everyone to the fireplace after months of disuse. The housing stock is predominantly 1980s to 2000s single-family tract homes in ZIPs 95621 and 95843, and the defining chimney characteristic here is the prevalence of prefab metal fireplaces with factory flues. These systems were installed when the homes were built, and thirty-plus years later many are showing their age at the cap, the chase top, and the flue liner joints.

The late-fall Diablo wind events that sweep through this part of the valley push leaves, seed pods, and nest debris down uncapped flues. A home with a missing or damaged spark arrestor can smoke back into the living room on the first cold night of the season, or worse, send sparks onto a dry roof. That wind-driven debris load, combined with the metal-flue housing stock, means Antelope chimney work skews toward inspection, cap and arrestor service, and prefab flue cleaning rather than traditional brick-and-mortar sweeping. The fire-safety stakes are also specific here: dry fall conditions make flue integrity and spark arrestor condition the difference between a contained fire and a structure fire.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Antelope Services

Antelope homeowners call us most often for two things: keeping their prefab flues clean and safe, and clearing the dryer vents that run through their laundry rooms and exterior walls. Both are about venting, and both are about fire prevention.

Chimney Sweep in Antelope

Most Antelope sweeps involve cleaning and inspecting manufactured flue systems rather than masonry chimneys. We remove creosote and the nest debris that Diablo winds push down uncapped flues, then check the cap, spark arrestor, and liner for damage. If your fireplace smokes back or you haven’t had it cleaned in two or more burn seasons, this is the place to start. Chimney Sweep in Antelope covers our full sweep scope and local pricing.

Chimney Sweep in Antelope

Dryer Vent Cleaning in Antelope

Lint-clogged dryer vents are one of the leading residential fire causes, and Antelope’s tract homes often run dryer exhaust through long interior wall cavities or up through the roof, which makes buildup worse than a short direct run. We clear the full vent path, check the termination flap, and confirm airflow at the exterior. Dryer Vent Cleaning in Antelope explains what’s involved and what it costs.

Dryer Vent Cleaning in Antelope
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 589-9896

Chimney Repair in Antelope

Chimney repair in Antelope is rarely about repointing brick. Most of the homes we work on in 95621 and 95843 have factory-built metal flue systems, and after twenty to forty years those systems fail at predictable points: the cap rusts through, the chase top leaks, the flashing separates from the roofline, or the liner joints corrode. The dry fall wind season makes any of those failures worse, because a damaged cap or arrestor in October becomes a debris-clogged, spark-leaking flue by December. Our Chimney Repair service is built around diagnosing these prefab-system failures and fixing them with professional-grade parts from Gelco, Famco, and Olympia Chimney, not hardware-store substitutes.

Chimney Cap Installation

Signs you need it

A missing or rusted-through cap lets rain, leaves, and birds into the flue, and you may hear animal noise or see water stains near the firebox.

What it costs in Antelope

Chimney cap installation in Antelope typically runs $150 to $400 depending on flue size and cap material.

How we do it

We measure the flue opening, fit a galvanized or stainless cap from Gelco or Famco with an integrated spark arrestor, and seal the mounting to the flue crown.

Chimney Flashing Repair

Signs you need it

Water staining on ceilings near the fireplace chase, peeling paint around the roofline, or damp drywall in upstairs rooms often traces back to failed chimney flashing.

What it costs in Antelope

Expect to budget $250 to $550 for chimney flashing repair in Antelope, depending on access and how much step flashing needs replacing.

How we do it

We remove the damaged flashing, inspect the decking beneath, install new step and counter flashing, and seal the transition so water sheds away from the chase.

What Chimney Repair Costs in Antelope

Item Typical range in Antelope
Chimney cap installation $150 – $400
Chimney flashing repair $250 – $550
Chimney liner installation (prefab retrofits) $800 – $2,200

Those are the repair items we quote most often on Antelope’s prefab flue systems. Liner work varies widely because some homes need a partial resurfacing while others need a full DuraFlex liner retrofit to meet current code.

How much does chimney repair cost in Antelope?

Chimney repair in Antelope typically runs $150 to $550 for cap and flashing work, and $800 to $2,200 when a liner replacement is involved. Prefab flue parts are standardized, so labor and access drive most of the price variation. Call (833) 589-9896 for a precise quote based on your system.

Can you repair a prefab chimney, or do I need a mason?

Prefab chimneys like the ones common in Antelope’s 1980s-2000s tract homes require metal-component repair, not masonry work. We stock and install Gelco, Famco, and Olympia Chimney replacement parts, and we can reline or resurface with HeatShield or DuraFlex rather than tearing out the chase. A mason is rarely the right call for these systems.

Brands We Service in Antelope

We service and install parts from HeatShield, Gelco, Olympia Chimney, and Famco, and we keep common prefab flue components stocked for Antelope’s housing era. That means most cap, arrestor, and chase-top repairs don’t wait on a special order. See our brands for the full list and why these trade suppliers matter.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 589-9896

Pricing for Chimney Company in Antelope, CA

Service Typical range in Antelope
Chimney sweep (prefab flue) $120 – $229
Chimney cap installation $150 – $400
Chimney flashing repair $250 – $550
Chimney liner installation (prefab retrofits) $800 – $2,200
Dryer vent cleaning $89 – $179
Dryer vent repair (minor) $100 – $300
Dryer vent replacement (full run) $300 – $700

Roof access and chase height are the two biggest price movers on Antelope homes, since two-story tract layouts and steep roof pitches add labor time to cap and flashing work. We quote a fixed price up front before any work begins, so the number on the estimate is the number on the invoice.

Neighborhoods We Serve in Antelope

We work throughout Antelope’s 95621 and 95843 ZIP codes, including the subdivisions along Antelope Road and the older tract pockets near Walmart and the Antelope Community Park. Most calls are reachable within a day or two of scheduling, and we batch appointments by area to keep travel time from inflating your quote.

  • Antelope Creek
  • North Antelope
  • Antelope Hills
  • Barrett Hills
  • Walerga Road corridor

Service Area – Cities Near Antelope

Beyond Antelope, we cover the surrounding Sacramento Valley communities where the housing stock and climate create similar venting and flue challenges. That includes Foothill Farms, CA, Citrus Heights, CA, North Highlands, CA, and Roseville, CA. Homeowners in those areas deal with the same prefab flue systems and fall wind debris, and the same repair standards apply.

Serving Antelope, CA – Our Local Coverage Area

We’re based in the Antelope area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Antelope

Ready to get started? Free estimates in Antelope
Call (833) 589-9896

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Antelope Customers Say

★★★★★ 4.8 from 5+ reviews

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Jessica Park

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Raj Gupta

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

- Daniel Whitaker

How It Works in Antelope

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Antelope. We'll get back to you fast. No obligation.

By clicking submit, you agree to the terms of our Privacy Policy and consent to being contacted by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7