Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Folsom?
Most chimney repairs in Folsom cost between $275 and $1,800, with the typical job landing around $600. A simple crown crack or cap replacement runs a few hundred dollars; a flue reline after a chimney fire or years of creosote damage pushes into the $2,000 – $4,500 range. Your exact number depends on what’s failing, how high the chimney stands above the roofline, and whether the fix is cosmetic or structural.
Call (833) 589-9896 for a free estimate. We’ll look at the flue, crown, flashing, and firebox, then tell you what actually needs fixing and what can wait.
Key Takeaways
- Typical Folsom chimney repair: $275 – $1,800; major relining: $2,000 – $4,500.
- Crown and cap repairs are the most common fixes we run across Folsom homes.
- HeatShield resurfacing can restore an aging liner for a fraction of full relining.
- Dryer vent cleaning is a separate, lower-cost service many homeowners bundle with a chimney visit.
- Free estimates from a specialist who repairs, not just reports.
Chimney Repair Cost Breakdown (2026)
Here’s what the line items actually run in the Folsom market. These are repair ranges, not “it depends” hand-waving. Real jobs fall inside these bands depending on access and materials.
| Repair Type | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney cap replacement | $175 – $450 | New stainless or copper cap sourced from Gelco or Famco, sized to the flue |
| Crown repair / resurfacing | $275 – $650 | Sealing cracks or rebuilding the crown so water can’t run down the flue |
| Crown rebuild | $650 – $1,200 | Full removal and re-pour when the crown is crumbling or separating |
| Flashing repair | $300 – $700 | Sealing or replacing the roof-to-chimney joint to stop leaks |
| Masonry tuckpointing / mortar repair | $450 – $1,400 | Repointing deteriorated mortar joints in the stack |
| HeatShield flue resurfacing | $1,200 – $2,400 | Restoring an aging liner without full tear-out |
| DuraFlex full liner installation | $2,200 – $4,500 | New code-compliant stainless liner for a cracked clay tile flue |
| Firebox repair | $500 – $1,600 | Rebuilding firebrick and the firebox floor |
| Smoke chamber rebuild | $700 – $1,800 | Re-parging the chamber above the damper so the flue drafts |
| Dryer vent cleaning (often bundled) | $150 – $325 | Clearing lint buildup from the full vent run |
What pushes a Folsom job toward the top of its range? Height and access get expensive. A chimney that stands well above the roofline on a two-story home takes longer, more ladder time, and safer staging. Material choice matters too: a commercial-quality cap from Olympia Chimney or Copperfield lasts far longer than a hardware-store substitute, and we price the job on the material that will actually hold up. And when we find more than one problem on the same visit (a cracked crown plus failing mortar plus a bad cap, which happens often), the combined job costs more than any single line item but less than three separate service calls.
What Affects Chimney Repair Pricing in Folsom
Two houses on the same street can get different quotes. Here’s what actually moves the number:
- What’s failing and how deep it goes. A surface crack and a compromised flue liner look similar from the driveway but cost very differently to fix. That’s why we inspect before we quote.
- Chimney height and roof access. Folsom’s mix of single-story ranch homes and taller two-story builds changes the labor involved. Higher chimneys mean more safety staging and more time.
- Liner condition. A cracked clay tile liner needs addressing, not ignoring. It’s a fire and carbon monoxide pathway. We offer HeatShield resurfacing as a less invasive option before defaulting to a full DuraFlex reline.
- Water intrusion. Folsom gets its rain in concentrated winter storms, and a failing crown or flashing lets water into the masonry. Catching it early keeps a crown repair from becoming a masonry rebuild.
- Material grade. Caps, dampers, and ventilation hardware from Gelco, Famco, Copperfield, and Olympia Chimney cost more up front and last longer. We don’t install aftermarket throwaways to hit a low bid.
- Whether repair or replacement makes sense. Sometimes a flue is too far gone to resurface and a full liner is the honest answer. We’ll tell you which path fits your chimney and your budget.
Why Chimney Repair Costs What It Does
Chimney work isn’t cheap because it isn’t simple. A repair that lasts means diagnosing the whole system: the flue, the crown, the flashing, the firebox, and the smoke chamber all work together, and a fix in one place affects the others. When we quote a repair, the price reflects professional-grade materials and doing the job so it holds. We’d rather install a Copperfield cap once than a flimsy one that fails in two winters.
This is also why we do more than sweep. Plenty of companies clean a chimney, hand you a report, and leave you to find a mason. We diagnose and we fix, whether that’s resurfacing a liner with HeatShield, installing a DuraFlex system, or rebuilding mortar joints. One call covers the sweep, the repair, and the reline. If your dryer vent runs through the same house, we clear that on the same visit: lint buildup is one of the leading causes of home fires, and it’s not an upsell to check it, it’s basic safety.
If you want the full picture of what we handle, see our Chimney Repair in Folsom page, and start at our home page for the full service lineup.
How to Save on Chimney Repair
There’s no magic discount, but there are real ways to keep the number down:
- Fix small problems before they grow. A $300 crown repair today beats a $1,200 crown rebuild next year. Water damage compounds fast once the seal fails.
- Ask about HeatShield before you assume reline. If your liner is aging but not destroyed, resurfacing can restore it for well under the cost of a full stainless installation.
- Bundle services on one visit. Having your chimney swept and your dryer vent cleared during the same appointment saves a second trip charge.
- Get a real diagnosis, not a phone quote. We quote from what we actually see in the flue, so you’re not paying for work you don’t need. Free estimates mean the diagnosis costs you nothing.
- Keep up with sweeping. Regular sweeping keeps creosote from building to the point where it damages the liner. Prevention is the cheapest repair there is.
Call (833) 589-9896 to schedule a free estimate. We’ll walk you through what we find and what it costs to fix, no pressure and no upselling.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Folsom?
Chimney Repair in Folsom typically runs $275 to $1,800, with most jobs around $600. Major relining with a DuraFlex system can reach $2,200 – $4,500 depending on height and flue size. Call (833) 589-9896 for an exact quote based on your chimney.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper. HeatShield resurfacing typically runs $1,200 – $2,400, while a full DuraFlex reline runs $2,200 – $4,500. If the existing liner can be restored, resurfacing saves real money. We’ll tell you honestly which path your flue needs. Call (833) 589-9896.
Can you come today for a chimney repair estimate?
Often, yes. Free estimates are available and we work to get out quickly for leaks and active damage. A water leak into the masonry shouldn’t wait. Call (833) 589-9896 to check same-day availability.
How much does a chimney cap cost installed in Folsom?
An installed chimney cap runs $175 – $450, sized to your flue and sourced from Gelco or Famco for a proper fit. A good cap keeps rain, birds, and debris out of the flue, which prevents the water damage that leads to bigger repairs. Call (833) 589-9896 for a quote.
Do you clean dryer vents too, and how much?
Yes. Dryer vent cleaning runs $150 – $325 and can be bundled with a chimney visit. Lint buildup is a leading cause of house fires, so clearing the vent is a safety step, not a sales add-on. Call (833) 589-9896 to add it to your appointment.
Get a Free Chimney Repair Estimate in Folsom
If you’re hearing water drip, smelling smoke backdraft, or noticing crumbling mortar on your chimney, get it looked at before winter storms make it worse. We sweep, repair, and reline under one roof, using professional-grade materials from brands the trade actually trusts. We diagnose the problem and we fix it, rather than handing you a report and walking away. Call (833) 589-9896 for a free estimate, and we’ll give you straight numbers on what your chimney needs.
Pricing reflects the Folsom market as of 2026. Chimney Sweep Folsom offers free estimates – call (833) 589-9896.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Ernesto Mendoza"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Kelly Quinn"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jessica Park